Start onze Cool Free-app!

Geniet van exclusieve apps-aanbiedingen.

Start de app
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer
1/1

Creality CR - 10 Max 450 x 450 x 470mm 3D-printer - Zwart EU Plug

Zie Vertaling
793.74€
961.01
12 Beoordelingen

Coupon:

bevordering:

Ondersteuning COD betaling

Magazijn & vergoeding

kiezen
CN-099:Verzenden tussen: Feb 17 - Feb 19

Product opties

kiezen
Zwart EU Plug

beoordelingen (12)

Karry
Jun 20,2019
The print quality is truly impressive compared to other printers I've had, and mine was also able to handle up to 70mm/s print speeds at 0.3mm layers just fine for functional parts. Only complaint is that some CR10 printers have a control board with an underspecced capacitor, which means the printer has a difficult time getting the nozzle past 225c. For me, I'm easily able to pick up a bigger capacitor and solder it on, but for those not comfortable with that, what you can do as a workaround is set your g-code to print at ~215c, then once the temp stabilizes and the print starts, adjust the nozzle temp to your desired setting. My printer came with an extra 0.4 nozzle tip which was a nice touch. Setting up / assembling the printer took about 30 minutes, super easy!
Bekijk meer

Discussie

Stel als eerste een vraag.

Een vraag stellen

Omschrijving

Algemene kenmerken:
• Het uiterlijk van de atmosfeer is eenvoudig
• Standaard mondstuk van 0,4 mm, hoge afdruknauwkeurigheid en goed effect, bovendien uitgerust met een mondstuk van 0,8 mm, geschikt voor groot formaat, hoge vulling, snel modelleren
• Stabiele structuur, het portaal vergroot de trekstang om een ​​stabiele driehoekige structuur te vormen, waardoor de fout wordt verminderd die wordt veroorzaakt door de vibratie van de Z-as tijdens het afdrukken
• Y-as dubbele riemconfiguratie 42 - 60 tweeassige motor, sterk vermogen en soepele transmissie
• Dubbele vermogensuitvoer, het moederbord wordt gevoed door een 75W-voeding en de broeihaard wordt gevoed door een voeding van 750 W
• De broeihaard wordt binnen 10 minuten tot 100 ° C verwarmd
• Standaard BL-aanslag, de automatische compensatie van de Z-as voor de oneffenheden van de platformkaart, lost gemakkelijk de afdrukfout op die wordt veroorzaakt door de ongelijkheid van het platform
• Standaard uitschakelfunctie, onderbrekingsdetectiefunctie, om printproblemen als gevolg van stroomuitval te voorkomen

Specificatie

Algemeen

Merk: Creality
Model: CR-10 MAX
Type: DIY
Materiaal (frames): Aluminium extrusie
Platform bord: Aluminium basis
Nozzle-hoeveelheid: single
Mondstuk diameter: 0.4mm
Nozzle temperatuur: Kamertemperatuur tot 250 graden
Product vormende grootte: 450 x 450 x 470 mm
Laagdikte: 0.1-0.4mm
Geheugenkaart offline afdrukken: TF-kaart
Print snelheid: 180mm / s
Platformtemperatuur: Kamertemperatuur tot 100 graden
Ondersteunend materiaal: PETG,PLA,TPU,Hout
Materiële diameter: 1.75mm
Taal: Engels
Bestandsformaat: AMF,OBJ,STL
Model ondersteunende functie: Ja
Spanning: 100V / 240V
Host computer software: Cura
Verpakkingssoort: ongemonteerde verpakking
Type connector: USB

Dimensies en gewicht

Productgewicht: 20.0000 kg
Pakket gewicht: 26,0200 kg
Productgrootte (L x B x H): 65,00 x 78,50 x 73,50 cm / 25,59 x 30,91 x 28,94 inch
Verpakkingsgrootte (L x B x H): 73,50 x 73,50 x 30,50 cm / 28,94 x 28,94 x 12,01 inch

Verpakkingsinhoud

Inhoud verpakken: 1 x 3D-printer
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug
Creality CR - 10 Max 450 x 450 x 470mm 3D-printer- Zwart EU Plug

aangeraden producten

Gesponsorde producten

Bonus voor nieuw lid: $ 50 coupon
793.74€

Creality CR - 10 Max 450 x 450 x 470mm 3D-printer

Kleur

Grootte

Aantal stuks - +
termijnen: Kiezen
loading...
loading...
annuleren
loading...
loading...
loading...

beoordelingen

4.92 *****
  • 11
  • 1
  • 0
  • 0
  • 0
  • Allemaal ( 12 )
  • ( 0 )
  • ( 0 )
Karry
Jun 20,2019
The print quality is truly impressive compared to other printers I've had, and mine was also able to handle up to 70mm/s print speeds at 0.3mm layers just fine for functional parts. Only complaint is that some CR10 printers have a control board with an underspecced capacitor, which means the printer has a difficult time getting the nozzle past 225c. For me, I'm easily able to pick up a bigger capacitor and solder it on, but for those not comfortable with that, what you can do as a workaround is set your g-code to print at ~215c, then once the temp stabilizes and the print starts, adjust the nozzle temp to your desired setting. My printer came with an extra 0.4 nozzle tip which was a nice touch. Setting up / assembling the printer took about 30 minutes, super easy!
Jackson
Jun 20,2019
I bought this printer to make parts for my rc car, but once i saw how amazing the printer printed i decided to test and print other things like this soap holder, and the prince symbol for my best friend. It printed so flawless He didnt believe me that it was 3d printed. I couldn’t ask for a better printer then this. I contacted creality just to see how long it would take to get back to me if i ever had a problem. I was amazed when they got back to me within 24 hours. Best product and service you could ever ask for. If you are looking for a 3d printer and a company that will have your back, go with creality. This printer it comes with an sd card, the usb reader, usb cable and an extra extruder nozzle.
Dwight Bessemer
Jun 19,2019
this is my first 3d printer and I am extremely pleased with it, i model on Fusion 360 and slice with Cura and all of my models come out with fantastic detail. the build area is massive compared to a lot of printers in this price range
Pearl Beerbohm
Jun 20,2019
Have already printed a lot, since I’m an architecture student, and it’s great.Also, I bought it because so many other students in my school has the same one, and it’s just really good, really big, and not expensive
Judy Effie
Jun 21,2019
This printer has been amazing, it’s my first 3D printer and the learning curve was easy. Just make sure to watch a lot of set up and unboxing videos before you start, it’ll save you a lot of trouble at first. 
Dana Eden
Jun 19,2019
this is a great printer for a DIY hobbie use. This will not be a perfect printer to work great straight out of the box without learning a ton of information and troubleshooting.
Sampson Thomson
Jun 19,2019
This printer is amazing! quality iw wonderful . Easy to put together and start printing. Irecomend it to anyone who likes to build things! well worth the money.
Paul Hutt
Jun 20,2019
This printer was easy to set up and use. There was a bit of of a learning curve but my prints are coming out better and better as I get to know the printer.
Mavis Richards
Jun 21,2019
I needed a 3D printer for college. It was fairly easily to put together with some help from friends. It does the job with minimal complications.
Berg Hawthorne
Jun 20,2019
My first 3d printer. It was very well package and easy to assemble. Working great so far. Still learning how to use. Very pleased
Bekijk meer
Bekijk meer
Bekijk meer