Open onze koele GRATIS app!

Geniet van exclusieve app-aanbiedingen.

Open de app
BFight 210 210mm borstelloze FPV Racing Drone
BFight 210 210mm borstelloze FPV Racing Drone
BFight 210 210mm borstelloze FPV Racing Drone
BFight 210 210mm borstelloze FPV Racing Drone
BFight 210 210mm borstelloze FPV Racing Drone
BFight 210 210mm borstelloze FPV Racing Drone
BFight 210 210mm borstelloze FPV Racing Drone
1/1

BFight 210 210mm borstelloze FPV Racing Drone - Zwart en blauw BNF FRSKY

See Translation
168.50€
187.43
70 beoordelingen

Coupon:

promotie:

Support COD payment

Warehouse & Fee

Select
CN-ED:Verzenden tussen: May 24 - May 25

Product Options

Select
Zwart en blauw BNF FRSKY
Winkel bezoeken

Beoordelingen (70)

passerbyeus@yahoo.com
Apr 24,2018
Ok they must have fixed all the issues with this one. Mine come with Frysky xm+ receiver bind on D16 so the document needs to be updated. There was no wire out of place like the older models. Mine also is not just one full frame peice , you can swap the arms. Flys like a champ. Flash props even. At this price it's a deal...
Meer weergeven

Beschrijving

Omschrijving: BFight 210 210mm FPV racing drone heeft de nette structuur, onderhoudsgemak en de externe aanpassing van frequentie / band. De vluchtcontroller en de videozender zijn gescheiden, wat goed is voor warmteafvoer en de hoge prestaties. De multirotor heeft vier onafhankelijke armen, waardoor het gemakkelijk is om een ​​van deze armen te vervangen. Nog belangrijker is dat als de ontvanger SBUS ondersteunt, u de frequentie / band rechtstreeks kunt wijzigen met de radiozender in uw hand. Met BFight 210 is FPV racen zeker leuker. Belangrijkste kenmerken: ● Nette structuur en goede warmteafvoer met 3 printplaten van de vluchtregelaar, 4-in-1 ESC en video-zender in het midden ● 4 mm ultradun 3K-carbonvezelchassis bestaat uit 4 onafhankelijke armen, wat het onderhoudsgemak verhoogt ● 4-in-1 BLHeli - S 30A ESC ondersteunt Oneshot, Multishot, de nieuwste digitale DShot-signalen en firmware-updates ● 5.8G 40CH real-time FPV, met MICRON CCD-camera, 1 km beeldtransmissiebereik, op afstand aanpassen van frequentie / band (ontvanger SBUS-ondersteuning vereist) Specificaties: Wielbasis: 210 mm Gewicht: 267 g Afmetingen: 178 x 178 x 38 mm (zonder schroeven) Frame materiaal: 3K koolstofvezel Bodemplaatdikte: 4 mm Dikte bovenplaat: 1,5 mm Flight controller: OMNIBUS F3 Pro met OSD borstelloze motor: F2205 2300KV borstelloze ESC: 4-in-1 BLHeli - S 30A Propeller: Gemfan 5152 driebladige camera: HS1177, 650TVL (zwart en wit), 600TVL (kleur) Beeldsensor: 1/3 inch Super HAD II CCD Video-zender: 5.8G 40CH 25mW / 200mW Voeding: 11,1 - 14,8V (3 - 4S LiPo) OMNIBUS F3 Pro Flight Controller Processor: STM32F303 MCU IMU: MPU6000 SPI Barometer: BMP280 Geïntegreerd BEC: ja Ondersteunde micro SD-kaart: tot 32 GB 4-in-1 BLHeli - S 30A ESC Hoofdprocessor: EFM8BB2F16G Driver: FD6288 MOSFET Opwaardeerbaar: ja Continue stroom: 4 x 30A Burststroom : 4 x 35A 960H Camera Beeldsensor: 1 / 2.7 inch CCD-resolutie: D1, 960H Lens: 2,5 mm TV-systeem: PAL / NTSC (instelbaar via OSD) Min. verlichting: 0.001 lux Stroomvoorziening: 5 - 17V DC Klik hier om meer te weten te komen over de resolutie. Klik hier om de gebruikershandleiding van de FPV-camera te downloaden. Verschillende versies: PNP: zonder ontvanger BNF DSMX: bevat DSMX Pro-ontvanger, compatibel met DSM2- en DSMX-protocol. 500m ontvangstafstand BNF FrSky: bevat FrSky Pro 8-kanaalsontvanger, compatibel met D8-modus, ondersteuning voor SBUS (standaard) en PPM. 500m ontvangstafstand BNF FLYSKY AFHDS: omvat FLYSKY AFHDS PPM-ontvanger, compatibel met AFHDS-zender. 500m ontvangstafstand BNF FLYSKY AFHDS 2A: bevat FLYSKY AFHDS 2A-ontvanger, compatibel met AFHDS 2A-zender. 500m ontvangstafstand Opmerking: De kleuren (zwart, blauw, rood, roze en transparant) van de schroefset worden willekeurig verzonden.

Specificatie

Algemeen

Type: Framekit
Versie: BNF

Motor

Model: F2205
Motor type: Borstelloze motor
KV: 2300

Vluchtcontroller

Type vluchtbesturing: F3

Camera

Video resolutie: D1, 960H
Sensor: CCD

Elektronische snelheidsregelaar

firmware: BLHeli-S
functies: DShot150,DShot300,DShot600,Multishot,Oneshot125,Oneshot42

Dimensie en gewicht

Productgewicht: 0.2670 kg
Pakket gewicht: 0.5200 kg
Productgrootte (L x B x H): 17,80 x 17,80 x 3,80 cm / 7,01 x 7,01 x 1,5 inch
Verpakkingsgrootte (L x B x H): 26,00 x 20,00 x 7,00 cm / 10,24 x 7,87 x 2,76 inch

Verpakkingsinhoud

Verpakkingsinhoud: 1 x Drone, 4 x Spare Propeller, 1 x batterijriem
BFight 210 210mm borstelloze FPV Racing Drone- Zwart en blauw BNF FRSKY
BFight 210 210mm borstelloze FPV Racing Drone- Zwart en blauw BNF FRSKY
BFight 210 210mm borstelloze FPV Racing Drone- Zwart en blauw BNF FRSKY
BFight 210 210mm borstelloze FPV Racing Drone- Zwart en blauw BNF FRSKY
BFight 210 210mm borstelloze FPV Racing Drone- Zwart en blauw BNF FRSKY
BFight 210 210mm borstelloze FPV Racing Drone- Zwart en blauw BNF FRSKY

Recommended Products

Sponsored Products

Bonus voor nieuwe leden: Coupon van $ 10
168.50€

BFight 210 210mm borstelloze FPV Racing Drone

Kleur

Grootte

Aantal - +
termijnen: kiezen
loading...
loading...
annuleren
loading...
loading...
loading...

Beoordelingen

4.66 *****
  • 47
  • 22
  • 1
  • 0
  • 0
  • Alles ( 70 )
  • ( 39 )
  • ( 11 )
passerbyeus@yahoo.com
Apr 24,2018
Ok they must have fixed all the issues with this one. Mine come with Frysky xm+ receiver bind on D16 so the document needs to be updated. There was no wire out of place like the older models. Mine also is not just one full frame peice , you can swap the arms. Flys like a champ. Flash props even. At this price it's a deal...
Suggestion:
Like to seen a micro cam on it but the stock cam will do great..
Bfight 210
Feb 15,2018
I am loving this drone !! it's great !! for the price I paid this drone is perfect for 210mm size, he is great for freestyle and HD filming with a small camera mounted on top of it, he has great punch, great precision and is really stable
Suggestion:
the camera could be better/lighter, and the receiver is not great, the antenna is really short and the range is not really good, needs an upgrade with a better one
Dacruze
Jan 13,2019
Not a bad drone. It’s a ready to fly purchase, for cheap. You get what you pay for. I’m sure I’ll figure that out myself as well. I received it within about 3 weeks. The packaging could have been a little better. Came in a generic cardboard box, no graphics, and foam holding the drone. It has instructions on various parts but not a parts list with specific part models in case of replacement. I bought the pnp no receiver option. It’s smaller than you think. Came with gemfan props, clear and black (mine did). Once I get it in the air, I’ll be able to see more about how well it flies. It’s just something to get me in the air for now.

Pro: price. Small. Looks well built and frame isn’t too heavy/clunky. Clean wire management. On screen display.

Con: it’s got a small bay for your stack. Which in turn makes the top and bottom plate also small. So you can either mount a battery on top. Or a go pro on top but battery on the bottom. No room to put both on top. Also battery straps included were super cheap, and small. But that is also because another con, they gave you practically no room to feed a strap through for the battery or an action camera. Also the fpv cam sticks out of the stack bay; so if you hit a pole or something that will get between the two front arms and get to the camera; it’ll most like break the camera or at least severely damage it. I would replace with a micro cam.

Would recommend for a friend for sure though.
Lee
Jul 16,2018
I was flying my quad in the park yesterday and sometimes I admit I fly in the streets in traffic. This is in a public park where tons of pedestrians walk interspersed with vehicle traffic and nobody seems to mind us playing with our toy drones in the park. Well, some ahole was driving and I pulled my quad in front of his truck preparing to get out of his was by pitching forward and throttling up to achieve maximum speed. This guy hit the gas and ran his bumber into my quad. This was a big Toyota Tacoma and I know that he saw it before hitting it therefore he did this on purpose because he's a jerk, because we had words after and he actually apologized for what he did. Since he did apologize, I just let him leave the park. My BFight survived the encounter intact so I'm not gonna hurt this prick. The quad flies smooth as hell and it's pretty fast too. I suppose the pickup truck hitting the damn thing (and it surviving without a scratch) speaks to durability as well. I can recommend this as a second quad for those who are already hooked. It is a step in the right direction for noobs advancing on to intermediate pilot status! Like me!!!
Suggestion:
It was hard to hit the bind button. I used a stick.
Stefan
Jan 16,2018
This is my 2nd racequad and I am absolutely impressed. Great quality, ligthweight build and good components. Only thing you have to change is the receiver when you fly with FrSky. The built in receiver ist just one for Tinys and has a maximum range of around 100m. Got a few failsaves on my maiden flight. Changed the receiver to a XM+ and now I have great range. Just fun to fly this one around. Unfortunately I broke my camera lens on one of the first crashes but that was no fault of the quad. Great quad for beginners of FPV flying as it is quite durable and very light.
Suggestion:
FrSky receiver is not suitable for a quad like this. With only 100m range you should change it.
David
Jun 24,2018
it's amazing for the price.. very stable in flight and enough power to do what you want it to do. loops rolls and flips very smooth with stock pids. comes with 2 pair of props.

for some reason I lost connection with the drone and it just kept going, and crashed somewhere.. I'm still looking for it.. should have changed it the Rx to xm+ or a r-xsr so I'm buying another one. but with a better Rx.

from now on I'm strapping a GPS tracker to every quad I Fly for now on..
Suggestion:
at about 100m my Rx fail-safed and it tumbled to the ground, must have hot just right the front two arms Broke off, after fixing those, it fail-safed again, and flew away.
BFIGHT 210 PNP
Dec 06,2017
a really great deal on a sweet 5 inch light weight quad. ive read so many reviews and watched so many videos that i had to try this out for myself..very impressed.

..great power..fun to fly..easy to work on..great props included..very easy to learn tuning and betaflght since it is hard to bring out any bad tendencies..
Suggestion:
the camera aspect ratio is bad for me..maybe because i am used to a different ratio

no frame or spare parts are available.

needs a better battery strap and some velcro on the bottom for safety
koki
Feb 23,2018
This is more than i expected, the frame is light but is very durable, the build quality is great, the soldering is done professionally, there is very little few things to tweak before flight and you have a perfect quad.
Suggestion:
Everything is super, no cons.
Phil
Apr 24,2018
It files great with so much power with 4s 1300mAh batteries. Very smooth in the air.

AFHDS 2A receiver it came with performed nicely with my FS-I6 radio. I haven't done the range test but 200m was not a problem.

Craft is considerably lightweight and I would recommend it to anyone starting FPV.
Suggestion:
Camera could be better. I had some trouble viewing the screen when I was facing towards the sun. Screen was kinda washed out when facing sun.
Vincent Fischer
Sep 19,2017
It's very light and silent. It runs very good with stock PIDs. Build quality is good (except the motor wires soldered to the 4in1 ESCs. they look like balls, made by someone with zero solder skills). I dislike some things on this model very much but still don't regret that I bought it. Overall experience is decent.
Suggestion:
I think this one is a bit over hyped. It's light but still pulls a bit too much current with the provided props. Also the micro DSMX receiver does not have diversity and the receiver antenna length is a bad joke. Without diversity and surrounded by carbon, prepare for some failsaves (you should be used to this if you use Spektrum :P). This kind of receivers is for micros and not for a full sized mini kwad imho. (Better buy the PNP and provide your own diversity RX with proper antennas)
The camera is some weird aspect ratio and looks very stretched on standard 4:3 goggles. Also you have to disassemble the frame to reach the OSD joystick.
The implementation of the VTX remote switching is just plain dangerous. It can happen that you change channel midflight. I would recommend to pull the S.Bus wire out of the connector that goes to your VTX.
Last but not least...what were they thinking when they chose these battery straps. They are just awful but there are no cutouts for better straps. You have to use these thin ones that are not even real velcro. They just don't work (atleast for me). I think i will dremel away some parts of the top plate to make bigger straps fit.
Don't let you discourage by the many negatives I wrote, I still like this model.
Meer weergeven
Meer weergeven
Meer weergeven